Introduction to Module 4
The Complete DaDo Online LWA: Module 1-7
•
42s
Join Paul as he guides you through the process of rejoining and resizing gold and silver rings using infilling and laser wire with the DaDo 2.0 laser welder . You'll learn how to create smooth, durable joins and achieve a professional finish with ease and learn why a laser can be better than a flame.
Up Next in The Complete DaDo Online LWA: Module 1-7
-
Part 1 - Gold ring join
Timeline
First, create a V-cut with an angle on the ring \[00:30].
The V should be knife-edged \[00:42].Start at a low power setting and gradually increase it until you achieve the desired action \[00:50].
If it sounds "splatty", it's too hot, so decrease the power \[01:12].Tack the ring to ...
-
Part 2 - Gold ring resize
Initial Attachment: Begin by attaching one side of the new gold section to the existing ring shank using a low power setting on the laser welder [00:28].
Second Side Attachment: Join the other side of the new section to the shank, ensuring a close and even fit [00:56].
Use pliers to adjust and ... -
Part 3 - Silver ring join
Timeline
Laser Settings and Preparation:
The video begins by establishing the appropriate power setting for the laser, emphasizing that silver requires more heat and technique than gold due to its heat conductivity \[00:26].
The laser's power is adjusted incrementally until the desired action i...
