Live stream preview
Part 2 - Watch infilling
The Complete DaDo Online LWA: Module 1-7
•
2m 11s
Timeline:
Prepare the material:
Use a piece of flattened stainless steel and cut it into strips or use laser wire to add material to the groove [00:48].
Apply the material:
Infill the material, starting with the lowest power setting [01:00].
Work the material: Once enough material is added, work it in, decreasing the power and increasing the spot if needed [01:23].
Up Next in The Complete DaDo Online LWA: Module 1-7
-
Part 3 - Watch pin
Timeline:
Initial Laser Application:
The presenter starts by using a laser on the lowest power and smallest spot size to check its effect on the pin [00:30].Adding Stainless Steel:
Stainless steel, which was milled and tin snipped, is added to the pin and the hole to introduce more material [0...
