Part 3 - Gold bolt ring
DaDo Online LWA - Module 1 - Jump & Bolt Rings
•
2m 46s
Timeline
First, ensure the ring is as flush as possible for a better and quicker job [00:32]
Start with the lowest power setting on the laser [00:49].
Fire a shot on the body of the ring, away from the joint, until you get action [00:57].
Increase the power in small increments [01:20].
Shoot the laser aside the joint [01:27].
Jump the gold into the joint [01:34].
Turn the ring over and repeat the process [01:43].
One shot inside the joint should suffice but if you can do more for added strength [01:55].
Gold is ideal for laser work due to its lower conductivity compared to silver [01:55].
While platinum requires significant heat, it also works well with lasers.
Tips and tricks
Fire next to the join - To achieve a strong and effective join, aim the laser just next to the joint rather than directly on it. This helps the metal flow over the seam, creating a better bond. Firing directly on the joint may not provide the desired fusion and could weaken the connection.
Up Next in DaDo Online LWA - Module 1 - Jump & Bolt Rings
-
Part 4 - Gold jump ring
Timeline
Skip Intro [00:15]
First, close up the joint, ensuring it is as flush as possible [00:25].
Start with the lowest power setting on the laser [00:43].
Shoot the first laser shot onto the thickest part of the jump ring [00:54].
Move over to join the ring [01:05].
Shoot the first shot to t... -
Part 5 - Attaching silver jump ring ...
Timeline
Skip intro [00:15]
Preparation
Set up the chamber and microscope [00:35].
Hook the pendant inside the chamber [00:35].
Ensure the jump ring is flush [00:43].Testing and adjusting power
Start with the lowest power setting on the laser machine [00:57].
Increase the power incrementally ... -
Part 6 - Attaching gold jump ring to ...
Timeline
Skip intro [00:15]
Preparation:
You can either file the jump ring flat and flush fit it to the pendant, or leave gaps for infilling with gold, which adds strength [00:50].Positioning:
Use microscopes in the chamber to position the jump ring [01:24].
Adjust it until you are happy wit...
