Up Next in DaDo Online LWA - Module 7 - Watches

• 

  02:25

  Part 1 - Watch strap

  Part 1 - Watch strap

  Timeline:

  Identify the issue:
  The watch strap is made of base metal, likely stainless steel, and has a broken tab [00:28].

  Prepare for repair:
  The repair involves using a laser to reattach the broken tab [00:34].

  Laser reattachment:
  Take your time and ensure the correct position before firing ...

• 

  02:11

  Part 2 - Watch infilling

  Part 2 - Watch infilling

  Timeline:

  Prepare the material:
  Use a piece of flattened stainless steel and cut it into strips or use laser wire to add material to the groove [00:48].

  Apply the material:
  Infill the material, starting with the lowest power setting [01:00].

  Work the material: Once enough material is added, wo...

• 

  04:10

  Part 3 - Watch pin

  Part 3 - Watch pin

  Timeline:

  Initial Laser Application:
  The presenter starts by using a laser on the lowest power and smallest spot size to check its effect on the pin [00:30].

  Adding Stainless Steel:
  Stainless steel, which was milled and tin snipped, is added to the pin and the hole to introduce more material [0...