Part 1 - Watch strap
The Complete DaDo Online LWA: Module 1-7
•
2m 25s
Timeline:
Identify the issue:
The watch strap is made of base metal, likely stainless steel, and has a broken tab [00:28].
Prepare for repair:
The repair involves using a laser to reattach the broken tab [00:34].
Laser reattachment:
Take your time and ensure the correct position before firing the laser [01:01].
Work around the base:
Work around the base of the broken tab [01:48].
Stainless steel properties:
Stainless steel is strong and can be infield if needed [01:53].
Complete the repair:
Finish the repair by going around the base [02:00].
Confirmation: The watch strap should now be working [02:12].
Up Next in The Complete DaDo Online LWA: Module 1-7
-
Part 2 - Watch infilling
Timeline:
Prepare the material:
Use a piece of flattened stainless steel and cut it into strips or use laser wire to add material to the groove [00:48].Apply the material:
Infill the material, starting with the lowest power setting [01:00].Work the material: Once enough material is added, wo...
-
Part 3 - Watch pin
Timeline:
Initial Laser Application:
The presenter starts by using a laser on the lowest power and smallest spot size to check its effect on the pin [00:30].Adding Stainless Steel:
Stainless steel, which was milled and tin snipped, is added to the pin and the hole to introduce more material [0...
