In module five, we'll cover re-clawing and re-tipping rings with gold and silver. We'll also show you how to work around and protect stones, so there's no need to remove them—using the DaDo 2.0.

Timeline

Protecting the Stone:
For beginners, covering the stone with blue tack is suggested for protection \[00:35].
However, with more confidence, this may not be necessary \[00:45].

Preparing the Wire:
A recess is cut into the claw, and a flattened wire is fitted flush onto it \[01:43].
At...

Timeline:

First, a piece of wire is prepared and flattened to fit into the ring's recess \[00:30].

The laser's power is adjusted to ensure it interacts correctly with the ring \[00:43].

The claw is attached to the setting by aiming the laser at the claw and pulling it onto the setting \[01:12]...

Finding the Correct Laser Power:
First, find the appropriate power level on the laser for the material being worked on. [00:45]

Adjusting the Power:
Once the initial power level is found, slightly reduce it to ensure controlled application. [01:02]

Adding Silver Material:
Apply silver to the to...