Part 3 - Costume jewellery
The Complete DaDo Online LWA: Module 1-7
•
2m 36s
Timeline:
Preparation:
Use the lowest power setting on the laser and gradually increase it until there's some action [00:41].
Filling the Split:
Use silver wire to fill the split [00:54].
Ensure the wire is in contact with the cuff link. Aim the laser at the silver wire, melting it into the split [01:02].
Addressing Stubborn Metal:
If the metal is stubborn, use a magic flux pen [01:45].
Working with Unknown Metals:
When working with unknown metals, aim for the wire and melt it onto the cuff link first [02:15].
Up Next in The Complete DaDo Online LWA: Module 1-7
-
Introduction Module 7
In module 7, we'll be covering how to repair damage to watches and straps made of stainless steel using the DaDo two laser welder.
-
Part 1 - Watch strap
Timeline:
Identify the issue:
The watch strap is made of base metal, likely stainless steel, and has a broken tab [00:28].Prepare for repair:
The repair involves using a laser to reattach the broken tab [00:34].Laser reattachment:
Take your time and ensure the correct position before firing ... -
Part 2 - Watch infilling
Timeline:
Prepare the material:
Use a piece of flattened stainless steel and cut it into strips or use laser wire to add material to the groove [00:48].Apply the material:
Infill the material, starting with the lowest power setting [01:00].Work the material: Once enough material is added, wo...
