Part 1 - Gold figaro chain
The Complete DaDo Online LWA: Module 1-7
•
3m 26s
First, ensure the joint is flush [00:28].
Start with the laser power as low as possible [00:49].
Increase the power in small increments until you see action on the link [00:55].
Shoot either side of the joint, not directly into it [01:31].
"Jump" the gold over into the joint [01:39].
Turn the piece over and repeat on the other side [01:47].
Smooth over the joint to tidy it up [02:27].
The laser allows for isolated, micro-repairs, avoiding the issues of heating
up other links that can occur with soldering [02:47].
Up Next in The Complete DaDo Online LWA: Module 1-7
-
Part 2 - Gold trace chain
Timeline
Initial settings:
Begin with a low power setting on the laser [00:46].First shot:
Direct the initial laser shot onto the body of the link, avoiding the joint [01:00].Adjust power:
Fine-tune the power setting based on the action observed. If it's too strong, reduce it slightly [01:... -
Part 3 - Silver figaro chain
Timeline
Flush join:
First, ensure the link is as flush as possible [00:25].White/ Blu tack:
Then, push the chain into white tack to be hands-free [00:46].Black marker pen:
Mark it up with a black marker pen to help it flush nicely [01:03].Power:
Start at the lowest power level and work ... -
Part 4 - Silver curb chain
Timeline
Flush link:
First, ensure the link is flush [00:27].Blu tack:
Use blue tack and your left thumb to secure the chain, exposing the link [00:40].Power:
Start with the laser at the lowest power setting [01:04].
Increase the power in increments [01:09].Firing the laser:
Fire the laser...
